-
5/16” Hex head bolts -
5/16” Hex Key - ¼” Hex head bolts
- ¼” Hex Key
- High-temp marine grease
- Motor
- Boattail
| -
1/4 in torque wrench - Integrated Firebolts
- Multimeter
- Teflon tape
- 2 1/4 NPT plugs
- Safety goggles
- Gloves
- Weigh boats
- Popsicle sticks
- Elbow joint
- Tee fitting
- Adjustable wrench
- Vice grip/pliers
- Small Scale
- Piston
- Complete set Piston replacement parts
- Piston assembly instructions
- White lithium grease
- 3 film canisters of black powder
| - Adjustable wrench
- Mutlimeter
- Small Screwdriver
| -
Allen Key '.077' -
(Pink Gaff Tape) Small Phillips Head -
Small File -
Small Flathead screwdriver -
2 mm 5 flathead screwdriver -
Ground station box - Avionics Toolbox
- Marsa, telemega, pyxida (should be 2 pyxidas in lab)
- Camera controls box
- British broadcasting circuit (likely already on av Bay)
- Camera ribbon cable (x2)
- Camera USB connectors to BBC PCB (x3)
- Firefly camera boxes (x4)
-
Other Avionics Items: Turn on Avionics Screwdriver | Blue tape | 2.4 x 20 mm screwdriver (green) | 4 2032 batteries | 2 radio beacons | Radar gun | Battery Charges (Blue lipo chargers in second drawer of avionics desk, including power cord that it plugs into) | Yagi Antennaes (433 MHz and 2 915 mHz, big and small ones) | GroundStation Pyxida (micro usb cable, pyxida, Pyxida LIPO, SMA connector) | Small blue handled pliers |
|
| Assembly Materials: 5/16 Hex Key ¼ Hex Key Flathead #8 Screws, ¼” long Phillips Head Screwdriver Flathead #4 Screws Tiny (check on size) screws and standoffs for DAQ enclosure Pokey tool for turning things on Some tape, just in case? Zip Ties or Twist Ties for LC wires Small flashlight
Other Components: FRR LE DAQ Other DAQ Components, including breakout board, battery, wiring for these 2 Firefly cameras 2 camera enclosures 1 DAQ enclosure, including mount and cover 2 LED rings
| - Hard goods box (6-32 bolts, 4 1/4-28 bolts, 4 1/4-28 bolts with washers, 3 chamfered 6-32 bolts, eyenut, cotter pin, 10-32 nuts, quicklinks) BRING THE WHOLE BOX, NOT JUST THE TACKLE BOX SO WE HAVE LOTS OF EXTRAS
- Integrated piston
- AV tower
- Recovery guard
- Payload stack
- Payload bulkhead
- NC coupler
- Antirotation rod
- Skinny god nut
- Integration stands
- Firebolts with tender descender extensions
- Tender descenders and loops
- Teflon tape
- Connecting loops (3)
- Black Powder
- Gloves
- Popsicle sticks and weigh boats
- GogglesSafety goggles
- Paper funnel
- Scale
- Hex key set
- Needle nose pliers
- Adjustable wrench
- Pliers
- Clocking tool/blue handled dental tool
- Phillips Head Screwdriver
- Blue tape
- Gaff tape
- Electrical tape
- Wire Strippers
- Printed or original copies of the Hermes II Lines Diagram and Tender Descender Integration Notes
| - Hermes II.sldasm
- SVN Stick
|