...
| No Format |
|---|
# chkconfig mysqld on |
Make sure that you set a firewall rule which allows the peer IdP node to connect to the daemon (on TCP port 3306).
Firewall
Make sure that the additional port used by the IdP are enabled in the firewall. Use the command "iptables --list -n --line-numbers" to determine the proper rule number; the following example assumes we are inserting rules beginning at number 36. Also replace 18.x.y.z with the appropriate IP address of the peer node in the cluster, not the local host.
| No Format |
|---|
# iptables --list -n --line-numbers
# iptables -I RH-Firewall-1-INPUT 36 -m state --state NEW -m tcp -p tcp --dport 8443 -j ACCEPT
# iptables -I RH-Firewall-1-INPUT 37 -m state --state NEW -m tcp -p tcp --dport 8444 -j ACCEPT
# iptables -I RH-Firewall-1-INPUT 38 -m state --state NEW -m tcp -p tcp --dport 446 -j ACCEPT
# iptables -I RH-Firewall-1-INPUT 39 -m state --state NEW -m tcp -p tcp --dport 447 -j ACCEPT
# iptables -I RH-Firewall-1-INPUT 40 -m state --state NEW -m tcp -p tcp -s 18.x.y.z --dport 9510 -j ACCEPT
# iptables -I RH-Firewall-1-INPUT 41 -m state --state NEW -m tcp -p tcp -s 18.x.y.z --dport 9530 -j ACCEPT
# iptables -I RH-Firewall-1-INPUT 42 -m state --state NEW -m tcp -p tcp -s 18.x.y.z --dport 3306 -j ACCEPT
# /etc/init.d/iptables save
|