Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin
Composition Setup

Excerpt
hiddentrue

Two people moving in one dimension with constant speed are destined to meet – but where?


Two people have decided to use a mountain trail to get some exercise. They start out from the parking lot at the bottom of the trail at the same time. Person A runs the trail at a constant speed |vA| = 5.0 m/s. Person B walks the trail at a constant speed |vB|=1.0 m/s. Given that the people must return along the same path they climbed up, and given that the summit of the trail is d = 3.0 km from the parking lot, how far from the summit will the people be when they meet going in opposite directions? (Assume neither person pauses.)

Toggle Cloak
idsys
Systems:
Cloak
idsys

Each person will be treated as a point particle.

Toggle Cloak
idint
Interactions:
Cloak
idint

Not relevant to this model.

Toggle Cloak
idmod
Model:
Cloak
idmod

applies to each person separately. Depending upon how you visualize the problem, the model may have to be applied twice to the runner (person A). We will suggest two possible methods by which to apply this model in the Approach.

Toggle Cloak
idapp
Approach:

Cloak
idapp

This problem stretches the definition of One-Dimensional Motion with Constant Velocity. Even if we assume the path is perfectly straight, the runner must reverse direction at the summit, and so it would seem that person A's velocity changes its mathematical sign within the problem. We will present two ways to deal with this issue. The first is more straightforward conceptually, but is slightly more tedious. The second requires deeper physical reasoning, but is slightly faster.

Info

Even though the dynamics of the motions described in this problem are very different if the path is curvy instead of straight, the kinematics are mathematically equivalent. It is mathematically possible to parameterize the motion along a non-self-intersecting path as a one-dimensional motion. Since this problem only deals with kinematics, our conclusions are valid for a curvy path as well.

Deck of Cards
idmethdeck
Wiki Markup
Two people have decided to use of a mountain trail to get some exercise. They start out from the parking lot at the bottom of the trail at the same time. Person A runs the trail at a constant speed _v_~A~ = 5.0 m/s. Person B walks the trail at a constant speed _v_~B~=1.0 m/s. Given that the people must return along the same path they climbed up, and given that the summit of the trail is _d_ = 3.0 km from the parking lot, how far from the summit will the people be when they meet going in opposite directions? (Assume neither person pauses.) Systems: Each person will be treated as a point particle. Model: [One-Dimensional Motion with Constant Velocity] applies to each person separately. Depending upon how you visualize the problem, the model may have to be applied twice to the runner (person A). We will suggest two possible methods to apply this model in the Approach. Approach: This problem stretches the definition of One-Dimensional Motion with Constant Velocity. Even if we assume the path is perfectly straight, the runner must reverse direction at the summit, and so it would seem that person A's velocity changes its mathematical sign within the problem. We will present two ways to deal with this issue. The first is more straightforward conceptually, but is slightly more tedious. The second requires deeper physical reasoning, but is slightly faster. {info}Even though the _dynamics_ of the motions described in this problem are very different if the path is curvy instead of straight, the _kinematics_ are mathematically equivalent. It is mathematically possible to parameterize the motion along a non-self-intersecting path as a one-dimensional motion. Since this problem only deals with kinematics, our conclusions are valid for a curvy path as well.{info} h5. Method 1 One way to be sure that each person has constant velocity is to split the problem into two parts. The point of division is when person A reaches the summit and turns around. If we set up a one-dimensional coordinate system as shown below, then during the first part of the problem person A moves with velocity _v_~A1~ = + 5.0 m/s and person B moves with _v_~B1~ = + 1.0 m/s. During the second part of the problem, person A moves with _v_~A2~ = - 5.0 m/s while person B still moves with _v_~B2~ = + 1.0 m/s. NEED COORD SYSTEM For our chosen model, there is only one Law of Change: {latex}
Card
labelMethod 1: Split the Motion

Method 1: Split the Motion

Toggle Cloak
iddiag
Diagrammatic Representation

Cloak
iddiag

One way to be sure that each person has constant velocity is to split the problem into two parts. The point of division is when person A reaches the summit and turns around. If we set up a one-dimensional coordinate system as shown below, then during the first part of the problem person A moves with velocity vA1 = + 5.0 m/s and person B moves with vB1 = + 1.0 m/s. During the second part of the problem, person A moves with vA2 = – 5.0 m/s while person B still moves with vB2 = + 1.0 m/s.

Image Added

Note

Can you think of a reason that it might have been a good idea to put x = 0 m at the summit instead of the parking lot? We will encounter one such reason at the end of this method.

Cloak
diag
diag

Toggle Cloak
idmath
Mathematical Representation

Cloak
idmath

For our chosen model, there is only one Law of Change:

Latex
\begin{large} \[ x = x_{\rm i} + vt\]\end{large}
{latex}

Because

we

have

divided

the

problem,

however,

we

must

apply

this

one

law

a

total

of

_

four

times

_

(person

A

during

part

1,

person

B

during

part

1,

person

A

during

part

2,

and

person

B

during

part

2).

Thus,

we

have:

{

Latex
}
\begin{large} \[ x_{\rm A1}=x_{\rm A1,i}+v_{\rm A1}t_{1}\]\[ x_{\rm B1}=x_{\rm B1,i}+v_{\rm B1}t_{1}\]\[ x_{\rm A2}=x_{\rm A2,i}+v_{\rm A2}t_{2}\]\[ x_{\rm B2}=x_{\rm B2,i}+v_{\rm B2}t_{2}\] \end{large}
{latex} {note}It is important that although persons A and B will potentially have different positions and velocities during each part, they share the same time. When part 1 ends, the same amount of time has elapsed for each person. Thus, in the equations, _t_ is only labeled with "1" or "2", not "A1" or "A2".{note} Four equations seems intimidating, but in this case a systematic approach gives quick results. Begin with part 1. In part 1, both persons start in the parking lot, meaning that (in our coordinate system) _x_~1A,i~ = _x_~1B,i~ = 0 m. This means: {latex}
Note

It is important that although persons A and B will potentially have different positions and velocities during each part, they share the same time. When part 1 ends, the same amount of time has elapsed for each person. Thus, in the equations, t is only labeled with "1" or "2", not "A1" or "A2".

Cloak
math
math

Toggle Cloak
idup
Split the Problem – Runner on the way up

Cloak
idup

Four equations seems intimidating, but in this case a systematic approach gives quick results. Begin with part 1. In part 1, both persons start in the parking lot, meaning that (in our coordinate system) x1A,i = x1B,i = 0 m. This means:

Latex
\begin{large} \[x_{\rm A1} = v_{\rm A1}t_{1}\]\[x_{\rm B1}=v_{\rm B1}t_{1}\]\end{large}
{latex}

We

have

already

determined

the

velocities,

but

we

still

have

two

unknowns

in

each

equation.

To

solve

either

one,

we

must

remember

how

we

defined

the

parts

of

our

problem.

If

we

recall

that

part

1

ends

when

person

A

reaches

the

summit,

then

we

must

have

_

x

_~A1~

A1 =

3000

m.

We

can

use

this

to

solve

for

_

t

_~1~: {latex}

1:

Latex
\begin{large} \[t_{1} = \frac{x_{\rm A1}}{v_{\rm A1}} = 600 \:{\rm s}\] \end{large} 
{latex}

Now,

because

_

t

_~1~

1 is

in

person

B's

equation

also,

we

find:

{

Latex
}
\begin{large} \[ x_{\rm B1} = x_{\rm A1} \frac{v_{\rm B1}}{v_{\rm A1}} = 600 \:{\rm m}\] \end{large}
{latex} {tip}If you are evaluating each expression as you go, think about whether the numbers make sense. Given that person B walks at 1
Tip

If you are evaluating each expression as you go, think about whether the numbers make sense. Given that person B walks at 1 m/s,

we

certainly

do

expect

that

_

t

_~1~

1 and

_

x

_~B1~

B1 will

be

the

same.{tip} With part 1 understood, we move on to part 2. The first important realization here is that part 2 ends when the two persons meet. Thus, we must have _x_~A2~ = _x_~B2~. From our four original equations, that means: {latex}

same.

Cloak
up
up

Toggle Cloak
iddown
Split the Problem – Runner on the way back

Cloak
iddown

With part 1 understood, we move on to part 2. The first important realization here is that part 2 ends when the two persons meet. Thus, we must have xA2 = xB2. From our four original equations, that means:

Latex
\begin{large} \[x_{\rm A2,i}+v_{\rm A2} t_{2} = x_{\rm B2,i}+v_{\rm B2}t_{2}\]\end{large}
{latex}

The

second

important

realization

is

that

part

2

begins

where

part

1

ends.

This

relationship

is

expressed

mathematically

by

writing:

{

Latex
}
\begin{large} \[x_{\rm A2,i} = x_{\rm A1} \]\[x_{\rm B2,i} = x_{\rm B1} = x_{\rm A1}\frac{v_{\rm B1}}{v_{\rm A1}}\]\end{large}
{latex}

which

means:

{

Latex
}
 \begin{large}\[t_{2} = \frac{x_{\rm A1} \left(1-\frac{v_{\rm B1}}{v_{\rm A1}}\right)}{v_{\rm B2} - v_{\rm A2}} = \frac{x_{\rm A1}}{v_{\rm A1}}\frac{v_{\rm A1} - v_{\rm B1}}{v_{\rm B2} - v_{\rm A2}} = 400\:{\rm s}\]\end{large}
Warning

Notice that vB2 - vA2 is 6.0 m/s, not -4.0 m/s, since vA2 is negative 5.0 m/s. It is easy to make mistakes with negative signs. In this case, however, your final answer for the meeting location will clearly indicate there has been a mistake if you subtract incorrectly. (Try it and see what happens.)

With t2 in hand, we know the time of the meeting. We still do not know the position, however. To get the position, we have to substitute our answer for t2 into either the equation for xA2 or that for xB2. Selecting the equation for person A:

Latex
\begin{large}\[ x_{\rm A2} = x_{\rm A1} + v_{\rm A2}\frac{x_{\rm A1}}{v_{\rm A1}}\frac{v_{\rm A1}-v_{\rm B1}}{v_{\rm B2}-v_{\rm A2}} \]\end{large}

A complicated equation like this is worth simplifying to see if we can make some sense of it. Some algebra will enable us to get rid of the compound fractions:

Latex
} {warning}Notice that _v_~B2~ - _v_~A2~ is 6.0 m/s, *not* -4.0 m/s, since _v_~A2~ is *negative* 5.0 m/s. It is easy to make mistakes with negative signs. In this case, however, your answer will clearly indicate a problem if you subtract incorrectly. (Try it and see what happens.){warning}
\begin{large} \[ x_{\rm A2} = x_{\rm A1} \left(\frac{v_{\rm B2}-v_{\rm A2} + \frac{v_{\rm A2}}{v_{\rm A1}}(v_{\rm A1}-v_{\rm B1})}{v_{\rm B2}-v_{\rm A2}}\right) = \frac{x_{\rm A1}}{v_{\rm A1}}\left(\frac{v_{\rm B2}v_{\rm A1}-v_{\rm A2}v_{\rm B1}}{v_{\rm B2}-v_{\rm A2}}\right)\]\end{large}
Tip

Some checks of this expression are possible. Substituting t2 into the expression for xB2 should give the same answer. If the walker's speed is zero or the runner's speed is infinite, the meeting should take place in the parking lot (x=0).

It is important to recognize that we are not finished yet. The problem asks for the distance of the meeting from the summit. We have found the position of the meeting. To find the distance requested, we must calculate:

Latex
\begin{large} \[ |x_{\rm summit} - x_{\rm meeting}| = x_{\rm A1} - \frac{x_{\rm A1}}{v_{\rm A1}}\left(\frac{v_{\rm B2}v_{\rm A1}-v_{\rm A2}v_{\rm B1}}{v_{\rm B2}-v_{\rm A2}}\right) = \frac{x_{\rm A1}}{v_{\rm A1}} \frac{v_{\rm A2}v_{\rm B1}-v_{\rm A1}v_{\rm A2}}{v_{\rm B2}-v_{\rm A2}} = 2000 \;{\rm m} \]\end{large}
Tip

This equation too can be checked. Now the limit as the walker's speed goes to zero or the runner's to infinity should be x = 3000 m. Also, once you have calculated the value, it is a good idea to check that the runner has traveled 5 times as far as the walker (is that true for our answer?).

Cloak
down
down

Card
labelMethod 2: Total Distance

Method 2: Total Distance

Toggle Cloak
iddiag2
Diagrammatic Representation

Cloak
iddiag2

Another approach to this problem is to avoid the issue of the direction switch for the runner by thinking in terms of distance alone. The key to such a restructuring of the problem is to consider the distance covered by both persons. Sketching a graph like the one below might help with this. In the graph the red line represents the runner while the blue line represents the walker. By the time they meet, the runner has already been to the summit, covering a distance d = 3000 m in the process. At this point, we do not know how far back down the mountain the runner has made it, nor do we know how far up the mountain the walker has come before they meet. Consider, however, that the distance the runner has come down the mountain plus the distance the walker has come up the mountain must add to equal the distance to the summit. Again, the sketch might help you to see this.

Image Added

Cloak
diag2
diag2

Toggle Cloak
idmath2
Mathematical Representation

Cloak
idmath2

With this important realization, we can say that the total distance covered by the runner in the time from leaving the parking lot plus the total distance covered by the walker since leaving the parking lot is equal to twice the summit distance, 2 d = 6000 m. Now, we simply construct an equation that says the same thing:

Latex
\begin{large} \[ 2d = |v_{\rm A}|t + |v_{\rm B}|t \] \end{large}
Note

This equation is found using the definition of distance and speed. It does not follow directly from the Laws of Change of any of our models. Going outside the usual models requires confidence with the material. If you are studying physics for the first time, you will likely find Method 1 more understandable.

Solving for t gives:

Latex
 \begin{large} \[ t = \frac{2d}{|v_{\rm A}|+|v_{\rm B}|} = 1000 \;{\rm s}\] \end{large}

This equation is simple, but we have to be careful about the meaning of the result. We have not set up equations for the position of either person yet. We have to do that now. The easiest equation to use is that of the walker, who does not change direction. The Law of Change for our model tells us:

Latex
\begin{large} \[ x_{\rm B} = x_{\rm B,i} + v_{B} t \] \end{large}

If we assume the same coordinate system as we defined in Method 1 (see the figure above) then the walker begins at xB=0 and we find:

Latex
\begin{large} \[ x_{\rm B} = v_{B} \frac{2d}{|v_{\rm A}| + |v_{\rm B}|} = 1000 \:{\rm m} \] \end{large}

As in method 1, we must remember that this is the position of the walker at the meeting, not the distance from the summit. To find the distance from the summit we calculate:

Latex
\begin{large} \[ |x_{\rm summit} - x_{\rm meeting}| = d - v_{\rm B} \frac{2d}{|v_{\rm A}| + |v_{\rm B}|} = d \frac{|v_{\rm A}|+|v_{\rm B}|-2v_{\rm B}}{|v_{\rm A}| + |v_{\rm B}|} = 2000 \:{\rm m} \] \end{large}
Tip

Is this expression equivalent to that found in method 1?

Cloak
math2
math2

Cloak
app
app