You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Two people have decided to use of a mountain trail to get some exercise. They start out from the parking lot at the bottom of the trail at the same time. Person A runs the trail at a constant speed vA = 5.0 m/s. Person B walks the trail at a constant speed vB=2.0 m/s. Given that the people must return along the same path they climbed up, and given that the summit of the trail is d = 3.0 km from the parking lot, how far from the summit will the people be when they meet going in opposite directions? (Assume neither person pauses.)

Systems: Each person will be treated as a point particle.

Model: [One-Dimensional Motion with Constant Velocity] applies to each person separately. Depending upon how you visualize the problem, the model may have to be applied twice to the runner (person A). We will suggest two possible methods to apply this model in the Approach.

Approach: This problem stretches the definition of One-Dimensional Motion with Constant Velocity. Even if we assume the path is perfectly straight, the runner must reverse direction at the summit, and so it would seem that person A's velocity changes its mathematical sign within the problem. We will present two ways to deal with this issue. The first is more straightforward conceptually, but is slightly more tedious. The second requires deeper physical reasoning, but is slightly faster.

Even though the dynamics of the motions described in this problem are very different if the path is curvy instead of straight, the kinematics are mathematically equivalent. It is mathematically possible to parameterize the motion along a non-self-intersecting path as a one-dimensional motion. Since this problem only deals with kinematics, our conclusions are valid for a curvy path as well.

Method 1

One way to be sure that each person has constant velocity is to split the problem into two parts. The point of division is when person A reaches the summit and turns around. If we set up a one-dimensional coordinate system as shown below, then during the first part of the problem person A moves with velocity vA1 = + 5.0 m/s and person B moves with vB1 = + 2.0 m/s. During the second part of the problem, person A moves with vA2 = - 5.0 m/s while person B still moves with vB2 = + 2.0 m/s.

NEED COORD SYSTEM

For our chosen model, there is only one Law of Change:

Unknown macro: {latex}

\begin

Unknown macro: {large}

[ x = x_

Unknown macro: {rm i}

+ vt] ]\end

Because we have divided the problem, however, we must apply this one law a total of four times (person A during part 1, person B during part 1, person A during part 2, and person B during part 2). Thus, we have:

Unknown macro: {latex}

\begin

Unknown macro: {large}

[ x_

Unknown macro: {rm A1}

=x_

Unknown macro: {rm A1,i}

+v_

t_

Unknown macro: {1}

][x_

Unknown macro: {rm B1}

=x_

Unknown macro: {rm B1,i}

+v_

t_

][ x_

Unknown macro: {rm A2}

= x_

Unknown macro: {rm A2,i}

+ v_

t_

Unknown macro: {2}

] [ x_

Unknown macro: {rm B2}

= x_

Unknown macro: {rm B2,i}

+ v_

t_

]\end

  • No labels