Component | Qty | Comment |
---|---|---|
PL301 (Enclosure) | 1 | |
Pi 0 | 1 | |
Pi Camera Module | 1 | Attached elsewhere, ribbon cabled into enclosure |
Battery | 1 | |
94674A485 Flush Mount Nut | 4 | McMaster-Carr, press fit into PL101 |
93505A316 4-40 Hex Standof | 4 | McMaster-Carr |
RR812xxxx1 Switch | 1 | Digikey |
Assembly
Waterjet provided .dxf file from .040 in aluminum sheet. Stock must measure at least 380mm by 120mm.
Use sheet metal break to bend the tabs on each side and then fold the side over. TIG tack the open corner and bottom two flanges for additional rigidity. Do not tack near holes or insert nuts. Install hex standoffs. Final assembly will be completed by students at Edmonton Public Schools.
PL301 (Outreach Enclosure).DXF